WIND POWER PLANTS

MODERNIZATION | DESIGN | MANUFACTURING OF EQUIPMENT AND SYSTEMS | WIND POWER PLANT AUTOMATION

Wind energy

Svitovyr actively implements green technologies in the energy sector. In particular, it carries out all installation work on the installation of windmills. This includes work on arranging the foundation, erecting the mast, installing the nacelle, fastening the blades, connecting the battery charge control relay, or a network inverter.

Scientific studies show that the wind energy potential of the Earth is 1200 TW. This figure is quite high, but the possibilities of using this type of energy are different in different regions of the Earth.

Wind turbines are used to convert wind flow into energy. The principle of operation of which is as follows: under the pressure of the wind, a wind wheel with blades rotates, which transmits torque through the transmission system of the generator shaft, which produces electricity. There are two fundamentally different designs of wind power plants: with a horizontal and vertical axis of rotation.

The power of the wind flow is proportional to its cross-sectional area and has a cubic dependence on the wind speed, i.e. its power increases even faster than the wind speed. Wind power plants are recommended to be installed in areas with strong and constant winds, namely: coastal strips and mountain tops.

Illustration

Photo report of the construction of a windmill

Illustration
Illustration
Illustration
Illustration
Illustration
Illustration

CONTACTS

If you are interested in our activities, you want to cooperate, or you have specific questions - leave a request by filling out the form and we will contact you.

Thank you!

We will contact you shortly.

Can't send form.

Please try again later.